Indiana Foil Surf & Wing Fuselage 650

The Surf & Wing Fuselage 650 is milled from hardened T6 6061 aluminum and has secure grooves to hold the front wings tightly on all four sides. It is tapered towards the back to save weight. The recessed aluminum cartridge provides a rigid and direct connection to the mast. The sacrificial zinc anode reduces the oxidation of the aluminum. The four holes in the fuselage allow for three positions of the stabilizer. The three different angle adapters allow the angle of attack of the stabilizer to be adjusted to 1, 2 or 3 degrees. This means that the stability and agility of the foil can be changed according to personal preference and skill level. The windsurf fuselage can accommodate all Indiana front wings and stabilizers.

Care for Aluminium Parts:

Rinse the connections and screws of your foil fresh water after every use.

We recommend that you take apart the foil completely if you are not using it for a long time

Check the anodes in the alu baseplate and the adaptor regularly. They will degrade after some time. This is normal. This will happen faster when the foil is used in salt water. Replace the anodes if they are broken or cracked.

Make sure to coat all screws with a thin layer of Tef-Gel before assembly. This will prevent corrosion and seizing of the screws.